description
CIC MIll Liner Factory has 5 tons electric furnaces for smelting, a whole set of VRH molding line with several advanced technologies in the casting field.2x5m2 automatic controlling gas heat-treatment furnace, 1.5x4m2 gas heat-treatment furnace, 2x5m2 gas hot air furnace for tempering, 1.3x1.6m2 medium-temperature electric heating furnace, 350 tons water quenching pool, 50 tons FEROQUENCH-2000 quenching cooling system. All the production procedures of mill liner including the molding, smelting, casting, shaking out, heat treatment, cleaning and quality inspection can be done in CIC Mill Liner Factory. CIC Mill Liner Factory also has DF-100 direct-reading spectrometer. MLD-10 dynamic-load abrasion testers etc, which can inspect the physical and chemical properties and abrasion resistance index of wear-resistant material. The annual output of the foundry is about 8000 tons.
In order to supply high quality products and better service to customer, CIC’s foundry has mature quality management and testing system. We take five steps to guarantee the quality of liquid steel: submitting inspection of the steel smelting workers, taking inspection results by labratory technician, joint inspection by Calibrating and Measuring Center of CITIC. The technology of argon injection liquid steel purification can improve the quality of liquid steel greatly. The VRH production technology during the casting procedure can get rid of water of sand mould to ensure the product quality and improve the dimensional accuracy and surface quality of product.
For the heat treatment procedure, automatic controlling temperature in 4 points gas heat-treatment furnace and hot air circulation tempering furnace supply good thermal status, the furnace temperature can be controlled within the ±10℃ range, which can ensure the uniform heating and controllable heating temperature.
We choose FEROQUENCH-2000 quenching medium as the cooling medium, the water-based quenching liquid can overcome the bad effects to the quenching quality caused by the traditional quenching oil.All these procedures promise the high quality of our products.
We get rich experience from the manufacturing and research and develop new products with domestic and foreign research institutions. Now CIC has low-carbon multicomponent low-alloying steel products, medium-carbon multicomponent low-alloying steel products, medium-carbon multicomponent medium-alloying steel products, high-carbon multicomponent high-alloying steel products, high manganese steel product, super-high manganese alloy steel products and high chrome alloy steel products.CIC also manufacture bearing bushes and pads of mill with annual output 1000 tons. With advanced heating technology, inspecting technology and automatic temperature controlling of Babbitt metal solution and advanced fusing technology of bearing alloy and black metal, CIC can guarantee the high quality of Babbitt metal products.
CIC also manufacture bearing bushes and pads of mill with annual output 1000 tons. With advanced heating technology, inspecting technology and automatic temperature controlling of Babbitt metal solution and advanced fusing technology of bearing alloy and black metal, CIC can guarantee the high quality of Babbitt metal products.
In recent years, our institutions research and develop high toughness and hardness Martensite series wear-resistant products, it captures broad market with its excellent property. And the advanced heat treatment procedure of new pearlite metal improved the wear-resistant property of pearlite wear-resistant steel. Through the designing and reforming of lining of AG/SAG mills, our products get better impact resistance and enjoyed high reputation from domestic and overseas customer.
Mechanical Property Introduction of Various Metals
鋼号 Steel Grade |
硬度 Hardness |
Αku (J/cm2) |
适用範圍 Application Range |
ZGMn13 |
HB179-229 |
≥140 |
通用 commonly used |
ZGMn13Cr2 |
HB≤300 |
≥80 |
通用 commonly used |
ZGMn17Cr2TiRe |
HB≤300 |
≥100 |
大型錘頭 big Hammer |
ZG42Cr2MnSi2MoRe |
HRC≥48 |
≥15 |
中小型磨機 small and medium sized mill |
ZG32SiMnCr2MoTiRe |
HRC≥45 |
≥20 |
大中型磨機 medium and large sized mill |
ZGCr6 |
HRC≥50 |
≥10 |
水泥磨 cement mill |
ZGCr13 |
HRC≥53 |
≥8 |
水泥磨 cement mill |
KmTBCr18Mo |
HRC≥52 |
≥5 |
水泥磨 cement mill |
KmTBCr20Mo |
HRC≥60 |
≥5 |
立磨襯闆vertical mill liner |
HMCB系列 |
HB 325-415 |
10-30 |
半自磨機 SAG mill |
DTM系列 |
HRC 45-50 |
30—50 |
大型磨機 large mill |
《